Description

• UV Ink Specialists: Specifically effective against cured and semi-cured UV ink buildup on wipers and capping rubbers.
• Stable Jetting: Regular use for “Nozzle Wash” cycles helps recover stubborn nozzles and maintain consistent drop placement.
• Safe Daily Care: Designed for “wet-capping” after shutdowns, keeping the nozzle surface moist to prevent ink from hardening during idle periods.
• OEM Reliability: As an original Mimaki part, it guarantees chemical compatibility with your printer’s internal seals and ink lines, protecting your warranty. 

• Supported Models: Extensive compatibility including Mimaki UJF-3042/6042 MkII, JFX200/500/600 series, UCJV150/300 series, and UJV100-160.
• Function: Daily cleaning of caps, wipers, and nozzle surrounds.
• Solvency: High-efficiency dissolution of UV-curable pigments and binders.
• Storage: Stable at 0–40°C; keep sealed and away from direct UV light or heat sources. 

1. Daily Wiper/Cap Cleaning: Moisten a clean, lint-free swab with ML 015 and gently wipe the rubber wiper blade and the edges of the capping station to remove ink accumulation.
2. Nozzle Wash Soak: For minor nozzle dropouts, fill the cap with liquid using a pipette and set the printer to “Nozzle Wash” mode for 10–30 minutes.
3. End-of-Day Wet Cap: Before turning off the printer for more than 24 hours, ensure the caps are cleaned and moistened with ML 015 to prevent the printhead surface from drying out.